XD234, XD1034
The BrightSign XD234 and XD1034 media players can be used to decode images, audio, and video (at resolutions up to 4096x2160x60p) for digital-signage and kiosk applications. In addition to driving audio/video devices, these players can be controlled with various networked and built-in interfaces.
This manual specifies the hardware interfaces and operational theory of the XDx34 series.
Block Diagram
Interfaces
XD234
Front | Back |
---|---|
microSD card slot | WiFi antenna connector (1 of 2) |
Status LEDs | 3.5mm audio out |
HDMI® out | 3.5mm IR in/out |
Service button (SVC) | GPIO (12 pins) |
Reset button (Reset) | 12V@3A Molex power connector |
RJ45 LAN | WiFi antenna connector (2 of 2) |
XD1034
Front | Back |
---|---|
microSD card slot | WiFi antenna connector (1 of 2) |
Status LEDs | 3.5mm audio out |
HDMI out | USB 2.0 (Type A connector) |
USB 2.0 (Type C connector) | 3.5mm IR in/out |
GPIO service button (SVC) | 3.5mm serial |
GPIO reset button (Reset) | GPIO (12 pins) |
RJ45 LAN | 12V@3A Molex power connector |
| WiFi antenna connector (2 of 2) |
Note
When a USB hub is plugged into the USB 2.0 port on a XD1034, the player will only enumerate the first three ports on the hub automatically. Plugging a device into one of the first three ports will enumerate the remaining ports.