/
WD105 WiFi/Bluetooth Module Installation (Series 5)

WD105 WiFi/Bluetooth Module Installation (Series 5)

Overview

The WD105 runs on all Series 5 players except the AU5. The BrightSignOS version should be 9.0.15 or higher.

You will need the following tools for installation: 

  • Phillips screwdriver with a PH2/PZ2 tip (PH2 is the US standard, PZ2 is the international standard)

  • Phillips screwdriver with a PH1/PZ1 tip (PH2 is the US standard, PZ2 is the international standard)

  • 8-inch (200mm) length tweezer with a serrated tip (or precision mini needle-nose pliers)

XC5 Installation Instructions

 

XD5 Installation Instructions

XT5 Installation Instructions

 

HD5 Installation Instructions

 

LS5 Installation Instructions

 

 

Related content

WD104 WiFi/Bluetooth Module Installation (Series 3 and 4)
WD104 WiFi/Bluetooth Module Installation (Series 3 and 4)
More like this
Hardware
More like this
WS103 WiFi/Bluetooth Module Installation (Series 3 and 4)
WS103 WiFi/Bluetooth Module Installation (Series 3 and 4)
More like this
SSD Installation (XCx55, XDx35)
SSD Installation (XCx55, XDx35)
More like this
BSN Device Setup
BSN Device Setup
More like this
Firmware Installation Instructions
Firmware Installation Instructions
More like this