As covered in the Provisioning page (part of the Start Here section which is encouraged reading for those new to BrightSign), player provisioning consists of 1) applying a Setup to the player, and 2) installing a Player App onto the player.

The Player App is the collective set of files and folders that provides the player with specific instructions for what to do upon startup. At a minimum, it must contain an autorun, or more specifically, an autorun.brs file (the .brs extension denotes a BrightScript file). The autorun may, for example, instruct the player to display a specific .html file which can be either local on the player or reside on an external website. Alternatively, the autorun may instruct the player to check a particular URL for updated presentations and/or content and, if new files are available, download them and play them.

There are three autorun-related files which unfortunately have similar-sounding names:

autorun.brs (may also be referred to as “the autorun” or “autorun file”)
autorun.zip
autozip.brs

While the naming convention is admittedly confusing, each term has a different function so it’s important to not conflate the terms.

Upon bootup, the player searches for certain autorun files. The player’s search follows a prescribed sequence as shown below.

As mentioned in the Player Storage section, the player will search for storage devices in a predefined order.

The player first looks for an autorun.brs file in the root directory of the first storage device it encounters.
1. If found, autorun.brs is executed.
If an autorun.brs file is not found, the player looks for an autorun.zip file in the same root directory.
1. If an autorun.zip file is found and it also contains within it an autozip.brs file, the player will unzip the autorun.zip file, in the process overwriting any existing files on the storage device.
2. The player will then reboot.
If these files are not found on the first storage device, the player will repeat these steps on the next storage device, if available.

If an autorun.zip is not found on any of the storage devices, the player will query the BSN.cloud provisioning service to see if the player has previously been provisioned with BSN.cloud.

Both autorun.brs and autozip.brs must be written in BrightScript and be given the specific filenames indicated.

Additional information about these files can be found here.

Below are sample autorun.brs and autozip.brs files for reference.

Sample autorun.brs

Sub Main()
    'Create the BrightSign event handler.
    msgPort = CreateObject("roMessagePort")
    
    'Define the screen viewing area.
    r = CreateObject("roRectangle", 0, 0, 1920, 1080)
  
    'Set the URL where the presentation resides. This can be either local or external.
    config = {
      url: "file:///index.html",
    }

    'Create an HTML event since our presentation is an HTML file.
    h = CreateObject("roHtmlWidget", r, config)
    h.SetPort(msgPort)
    sleep(10000)
    h.Show()

    'Event loop to ensure that the script runs indefinitely
    while true
        msg = wait(0, msgPort)
        print "type(msg)=";type(msg)
        if type(msg) = "roHtmlWidgetEvent" then
            eventData = msg.GetData()
            if type(eventData) = "roAssociativeArray" and type(eventData.reason) = "roString" then
                print "reason = ";eventData.reason
                if eventData.reason = "load-error" then
                    print "message = ";eventData.message
                endif
            endif
        endif
    end while

End Sub

Sample autozip.brs

'name file autorun.zip
' Content update application

Sub Main()
    path$= FindDestPath()
    source$= FindSourcePath()
    package = CreateObject("roBrightPackage", source$+"autorun.zip")
    package.SetPassword("test")
    package.Unpack(path$)
    package = 0
    CreateDirectory(path$+"brightsign-dumps")
    CreateDirectory(path$+"pool")
    CreateDirectory(path$+"feed_cache")
    CreateDirectory(path$+"feedPool")

    DeleteFile(path$+"autozip.brs")
    DeleteFile(source$+"autorun.zip")
    a=RebootSystem()
End Sub

Function FindDestPath()
    if not IsFirmwareValid() then
        return "SD:/"
    end if

    destinationPaths = ["SSD:", "SD:", "USB1:"]
    for each destination in destinationPaths
        if IsMounted(destination) then
            return destination+"/"
        end if
    next
    return "unknown"
End Function

Function FindSourcePath()
    if not IsFirmwareValid() then
        return "SD:/"
    end if

    sourcePaths = ["USB1:", "SD:", "SSD:"]
    for each source in sourcePaths
        if IsMounted(source) and CheckFile(source+"/autorun.zip") then
            return source+"/"
        end if
    next
    return "unknown"
End Function

Function IsMounted(path as String)
    if CreateObject("roStorageHotplug").GetStorageStatus(path).mounted then
        return true
    end if

    return false
End Function

Function IsFirmwareValid()
    di = CreateObject("roDeviceInfo")
    return di.FirmwareIsAtLeast("7.0.60")
End Function

Function CheckFile(path as String)
    file = CreateObject("roReadFile", path)
    if type(file) = "roReadFile" then
        return true
    end if

    return false
End Function

Next - Content Sources >

Documentation

Autorun Files

Sample autorun.brs

Sample autozip.brs