/
SSD Installation (XTx44, XTx43, XDx34, XDx33)
SSD Installation (XTx44, XTx43, XDx34, XDx33)
- BrightSign TechDocs
Owned by BrightSign TechDocs
The SSD slot on the BrightSign XTx44/XDx34 is an M-keyed M.2 connector compatible with NVMe drives, while the XTx43/XDx33 is an M-keyed M.2 connector compatible with ATAPI (SATA) drives. See this page for a full list of required and recommended specs for SSD devices.
Important
Because the SSD interface differs between the XTx43/XDx33 and XTx44/XDx34 (ATAPI vs. NVMe), SSD drives intended for the XTx43/XDx33 cannot be transferred to the XTX44/XDx34, and vice-versa.
We recommend 2280 (80mm) SSD modules for use with these players. There is a hole to accommodate a standoff for 42mm SSD modules (as well as 60mm modules on the XTx43/XDx33), but you will need to install your own standoff to secure the module to the circuit board.
, multiple selections available,
Related content
SSD Requirements and Recommendations
SSD Requirements and Recommendations
More like this
SSD Installation (XCx55, XDx35)
SSD Installation (XCx55, XDx35)
More like this
Hardware
Hardware
More like this
Choosing a Series 3 Model
Choosing a Series 3 Model
More like this
(3) Player Storage
(3) Player Storage
More like this
(1) Player Storage
(1) Player Storage
More like this