XDx32 Environmental and Power Usage
BrightSign XDx32 players are designed to be used between 0°C and 40°C, at 90% maximum relative humidity, non-condensing.
The power supply on the BrightSign XDx32 series is 36W and 12V at 3A. These players will use approximately 1A of power when playing a 720p or 1080i MPEG2 HD source file.
An additional 2A of power is available for peripherals connected to the player. The user should not connect any combination of peripherals that will exceed 2A draw. If more than 2A is drawn, the external power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.
If the device is being powered by the power supply, the 2A can be shared in any way among the following connectors:
Connector | Maximum Power Usage |
Ethernet | Approx. 180mA (when transferring data) |
USB | 500mA (on each connector) |
DE-9 5V* | 500mA |
DA15 3.3V | 500mA |
HDMI® 5V | 500mA |
IR blaster output | 85mA |
If the device is being powered by PoE, only 1A is available for all connectors (or possibly less if the device is running a resource-intensive presentation). It can be shared in any way among the following connectors:
Connector | Maximum Power Usage |
Ethernet | Approx. 180mA (when transferring data) |
USB | 500mA (on each connector) |
DE-9 5V* | 100mA |
HDMI 5V | 500mA |
IR input/output | 85mA |
*DE-9 is more commonly referred to as DB-9