4.4-Enhanced Audio Zones
Important
Cross-fading will not work between audio tracks if they have different sampling rates (for example, if the first file is sampled at 48kHz and the second is sampled at 44kHz).Â
Use the Zone Properties window of an Enhanced Audio zone to edit the following:
- Audio Output: Choose to output audio via HDMI, Analog Stereo, and/or SPDIF. Note that analog and SPDIF outputs are only available on certain models.
- Pass through: Supplies the un-decoded audio signal through the HDMI/SPDIF connector. Use this option if the zone audio (for example, AC-3 Dolby Digital) is being decoded on an external device.
- Stereo: Supplies the decoded audio signal through the HDMI/SPDIF connector.
- Audio Mixing: Choose the mixing of the audio output:
- Stereo: Outputs both left and right audio signals.
- Left: Outputs the left audio signal only.
- Right: Outputs the right audio signal only.
- Initial Volume: Set the initial volume for audio files (0-100).
- Minimum Volume: Sets the minimum volume for audio files (0-100).
- Maximum Volume: Sets the maximum volume for audio files (0-100).
Note
The Maximum Volume setting will be overridden by other volume settings in a presentation, including the Initial Volume setting for the zone and volume commands attached to events or states.
- Fade(in seconds): Sets the duration of cross-fading between audio files, as well as the fade in and fade out durations at the beginning and ending of a playlist.
Â