The HD222 and HD1022 are designed to be used between 0°C and 40°C, at 90% maximum relative humidity, non-condensing.
The power supply for the HD222 and HD1022 is 15W and 5V @ 3A. The device will use approximately 1A of power when playing a 720p or 1080i source file.
An additional 2A of power is available for peripherals connected to the player. The user should not connect any combination of peripherals that will exceed 2A draw. If more than 2A is drawn, the external power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.
If the device is being powered by the power supply, the 2A can be shared in any way among the following connectors:
Connector | Maximum Power Usage |
Ethernet | Approx. 180mA (when transferring data) |
USB 2.0 | 500mA (on each connector) |
DE-9 5V* | 500mA |
DA15 3.3V | 500mA |
HDMI® 5V | 500mA |
*DE-9 is more commonly referred to as DB-9