BrightSign Shell Commands
- BrightSign TechDocs
The following commands are currently available in the BrightSign Shell:
Command | Description |
|---|---|
| Display the list of available commands. |
| Provide more information about a command. |
| Clear the terminal window. |
| Exit the shell. |
| List the contents of a storage directory. |
| Measure the performance of file reading. |
| Measure the performance of file writing. |
| Measure simultaneus file read/write performance. |
| Play an audio snippet. |
| Start the BrightScript debug console. |
| Perform a manufacturing test. |
| List tasks. |
| Reboot the system. |
| Shut down the system. |
| Display the date and time. |
| Set the date and time. |
| Display the time zone. |
| Display a list of accepted time zones. |
| Set the time zone. |
| Change the current directory. |
| Delete files or or directories recursively. |
| Display software versions. |
| Access the device registry. |
| Display device uptime. |
| Write a boot file to flash. |
| Erase a boot file in flash. |
| Display device identification information. |
| Determine a file type. |
| Cryptographically hash a file. |
| Reset the system to factory defaults. |
| Format a drive using one of the following file systems: "vfat", "ext3", "ext4". |
| Eject a drive. |
| Display the system log. |
| Clear the real time clock (RTC). Note that this action does not modify the system clock. |
| Probe a file. |
| Analyze a file. |
| Display the PTP status. |
| Display a list of discovered USB devices. |
| Configure the network interface. Type |
| Scan for WiFi networks. |
| Measure the download performance from the specified URL. If a destination file is not specified, the contents are discarded. |
| Look up the hostname in the DNS. |
| Play a video snippet. |
| Display an image. |
| Change the current video mode. |
| Read the EDID from the attached monitor. |
| Set the VGA power saving mode. |