Creating Link Synchronized BrightWalls (DOCS-991)

Link Synchronized Method

Create the Presentation

1. Select New Presentation in the Dashboard
2. Select Standard as the Presentation Type
3. Enter a Name (for example, Upper Left). This will be your master presentation.
4. Select Start
5. This will take you to a new window. Double-click on the zone in the center panel.
6. Switch the Interactive slider at the top right to make the presentation interactive.
7. Drag your starting image onto the screen to prepare for synchronization as well as a video.

Image 1

Set the Synchronization Commands

1. Add a Timeout event to the image and drag it from the image to the video (see Image 1).
2. Add a Media End event to the video and drag it from the video to the image.
3. Select the timer (Timeout) icon on the image and open the Advanced tab.
4. Select Add Command:
   1. Select Link under Command
   2. Chose Synchronize as the Command Parameter
   3. Choose the down arrow and then enter "play" as the Keyword (see Image 2)
5. On the Media End event, select Add Command:
   1. Select Link under Command. 
   2. Chose Synchronize as the Command Parameter.
   3. Choose the down arrow and then enter "stop" as the Keyword. 
6. You can optionally add a UDP Media event to the image and name/label it "play", and add a UDP Media event to the video and name/label it "stop". Select the UPD Media event icons and under the Advanced tab, select Add Command:
   1. Select Link under Command
   2. Chose Synchronize as the Command Parameter
   3. Choose the down arrow and then enter "play" as the Keyword for the image UDP Media event and enter "stop" as the Keyword for the video UDP Media event.
7. Select Publish in the top right corner and select Save.

Image 2

Schedule the Follower Presentations