Page Comparison

...

• decoder_name: The system name of the decoder
• friendly_name: The name of the decoder as specified when calling SetDecoderMode()
• max_decode_size: The maximum resolution of the decoder, as set by system software. This value can be either "4K" or "HD"
• configured_decode_size: The maximum resolution of the decoder that is specified when calling SetDecoderMode()
• mode: The current mode of the decoder, which can be either "Regular" or "Mosaic"
• usage_count: The number of videos currently being decoded by the decoder
• max_usage: The maximum number of videos that can be decoded simultaneously by the decoder. The optimum max_usage limits  limits are described below; the limit may be lower depending on a number of factors, including interlacing and frame rate.
  • 4K decoder:
    • 1 4K video
    • 2 HD videos
    • 4 SD videos
    • 8 CIF videos
    • 10 QCIF videos
  • HD decoder:
    • 0 4K videos
    • 1 HD video
    • 3 SD videos
    • 4 CIF videos
    • 5 QCIF videos
• mosaic_mode_interlace: The current deinterlacing mode of the decoder, which can be either "Enabled" or "Disabled". This value is specified when calling SetDecoderMode().

...

SetPowerSaveMode(power_save_enable As Boolean) As Boolean

Turns off Disables HDMI output, the syncs for VGA output, and the DAC output for component video. This The absence of a signal will cause some monitors to go into standby mode.

EnableVideo(enable As Boolean) As Boolean

Enables video output from the device if True. Setting this method to False disables all video output from the device. This method is set to True by default.

IsAttached(connector As String) As Boolean

...