The
...
XD235 and
...
XD1035 are designed for sustained ambient temperatures
...
between 0°C and 50°C. Non-operational (transportation or storage) temperatures can range from -20°C to 85°C. Units should be allowed time to acclimate before being powered up.
Operating the players
...
above 50°C ambient for prolonged periods may reduce the operational life of the product and result in intermittent resetting of the device.
| Warning |
|---|
...
ImportantExposing a cold player to warm air at high relative humidity may cause water to condense inside the player, leading to component failure. Damage due to such internal condensation is not covered by warranty. If a player is cold, allow several hours for it to acclimatize to ambient conditions before applying power. |
Power Adaptor
The
...
XD235 and
...
XD1035 are supplied with
...
18W of power when playing a 3840x2160x60p H.265 (HEVC) source file.
27W of power when playing a (8K) 7680x4320x60p H.265 (HEVC) source file.
3V3 power is available on the m.2 expansion ports for peripherals (Wi-Fi module, SSD module) the power to each port it not restricted but the combined power consumption should not exceed 3.5A.
...
12V@3A power supply.
An additional 2A of power is available for peripherals connected to the player. The user should not connect any combination of peripherals that will exceed 2A draw. If more than 2A is drawn, the external power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.
...
If the device is being powered by the power supply, the 2A can be shared in any way among the following connectors:
Connector | Maximum Power Usage |
|---|---|
RJ-45 | Approx. 180mA (when transferring data) |
USB 2.0 (Type C) |
...
1A |
USB 2.0 (Type A) |
...
1.5A |
GPIO |
...
3.3V |
...
500mA | |
HDMI® |
...
5V @ 300mA per port. Ports are protected above 400mA
...
IR Blaster (output)
...
5V | 70mA |
IR blaster output | 85mA |
M.2 Wi-Fi Module | 3V3 The combined power of these expansion ports should not exceed 3.5A |
M.2 SSD Module |