Page Comparison

Events in BrightScript center around an event loop and the roMessagePort object. Most BrightScript objects can post to a message port in the form of an event object: For example, the roTimer object posts events of the type roTimerEvent roTimerEvent when configured intervals are reached.

The following script sets the destination message port using the SetPort() method, waits for an event in the form of an roGpioButton object, and then processes the event.

...

print "BrightSign Button-LED Test Running"
p =   CreateObject("roMessagePort")
gpio =  CreateObject("roGpioControlPort") 
gpio.SetPort(p)
 
while true
   msg=wait(0, p)
   if type(msg)="roGpioButton" then
       butn = msg.GetInt()
       if butn <=5 then
           gpio.SetOutputState(butn+17,1)
           print "Button Pressed: ";butn
           sleep(500)
           gpio.SetOutputState(butn+17,0)
        end if
    end if
 
   REM ignore buttons pressed while flashing led above
   while p.GetMessage()<>invalid
         end while
end while

Note that these two lines 6-7 can be replaced using the following (and substituting end while with end for):

For each msg in p