This section describes how specific components operate on the LS425 and LS445.
On-Board
...
The four on-board LEDs have the following indicators:
...
LED
...
Indication
...
Green power (Pwr)
...
Displays when the board is powered up and not in reset mode. Flashes during the firmware update process.
...
Green file-system activity (Bsy)
...
Flashes any time there is file-system activity (on any storage device)
...
Blue WiFi ()
...
Flashes when the board is being updated
...
Red status (Err)
...
Flashes a certain number of times to indicate which error is occurring. The flash codes are described below.
...
2
...
Unspecified error
...
3
...
Network recovery script is preparing to run on a device configured for network recovery.
...
4
...
No upgrade file found
...
5
...
Failed to load kernel module
...
6
...
Board is not capable of running the current firmware version
...
7
...
A piece of on-board hardware is not working correctly.
...
8
...
Problem related to the storage device (either the USB drive or microSD card)
...
9
...
Problem related to the registry/NAND
...
10
...
The autorun script encountered a load/run error.
...
11
...
WiFi-related error
...
12
...
LED
There is one on-board LED
On-Board Switch / SVC Button
...