Versions Compared

Old Version 5

changes.mady.by.user BrightSign TechDocs

Saved on

compared with

New Version Current

changes.mady.by.user BrightSign TechDocs

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updated as per DOCS-1271

...

The four on-board LEDs have the following indicators:

LED

Indication

Green power (Pwr)

Displays when the board is powered up and not in reset mode. Flashes during firmware update process.

Green file-system activity (Bsy)

Flashes any time there is file-system activity (on any storage device)

Blue (WiFi)

Flashes when the player is connecting to the wireless network. Displays solid when connected.

Red status (Err)

Flashes a certain number of times to indicate which error is occurring. The flash codes are described below:

  • 2: Unspecified error

  • 3: Network recovery script is preparing to run on a device configured for network recovery

  • 4: No upgrade file found

  • 5: Failed to load kernel module

  • 6: Board is not capable of running the current firmware version

  • 7: A piece of on-board hardware is not working correctly

  • 8: Problem related to the storage device (either the USB drive or MicroSD card)

  • 9: Problem related to the registry/NAND

  • 10: The autorun script encountered a load/run error

  • 11: WiFi-related error

  • 12: Unable to find bootable image

On-Board Switch / SVC Button

...

The XD235 and XD1035 each have one MicroSD slot, which supports transfer modes up to UHS-1 DDR50 (50MB/s). There is no inherent a 2TB limit on the storage capacity of microSD cards used with the player.

...