...
The power connector for the HD225 and HD1025, which connects the power cord to the device, is rated for 12V@3A. It uses a locking connector to prevent inadvertent disconnections.
HDMI Output
The HDMI®-out connector is used to send digital video and audio to HDMI-enabled sink devices. The HD225 and HD1025 support at least two simultaneous 1920x1080x60p decodes.
3.5mm Audio Connector
The HD225 and HD1025 have a dedicated 3.5mm stereo audio port and a combination analog/optical audio jack. To transmit a digital audio signal, use an optical audio cable. Analog and digital audio cannot be transmitted simultaneously. Dolby audio is supported as a paid license.
...
The HD1025 has one USB-A 2.0 port to connect USB-compatible devices. This device provides 5V 1A over each USB port for peripheral devices.
HDMI Output
The HDMI®-out connector on the HD225 and HD1025 is used to send digital video and audio to HDMI-enabled sink devices. CEC control and AVI are supported over each HDMI interface independently, and it can maintain the configured multiscreen layout if one of the HDMI outputs loses sync.
The HD225 and HD1025 support at least two simultaneous 1920x1080x60p decodes.
WiFi Antenna Connectors
The HD225 and HD1025 have a two SMT type SMA connectors and an M.2 connector to allow easy installation of external WiFi antennas. Both devices contain an internal M.2 PCIe card that enables WiFi/Bluetooth.
...