...
| Note | ||
|---|---|---|
| ||
If you do not know the IP address of your player, you can obtain it by powering up the player without an SD card inserted: The IP address, along with other information about the unit, will be displayed on screen once the unit boots. |
To perform an operation, select a player from the list (or select multiple players by holding down Shift) and right-click the selection:
...
- Refresh: Click this button to get the most up-to-date snapshot(s) from the player.
- Date/Time: The timestamp indicating when the snapshot was taken. The timestamp is formatted as follows: yyyy:mm:dd hh:mm:ss
- Serial Number: The serial number of the player taking the snapshot.
- Model: The model number of the player taking the snapshot.
- Firmware: The firmware version of the player taking the snapshot.
- Remove Unit(s): Removes one or more players from the Local Network list. This action only affects the BrightAuthor UI; it does not change the settings of players in any way.
- Show All Units: Adds back all players that have been removed from the list using the Remove Unit(s) command.
- Info: Displays information about the selected player, including the Unit ID (i.e. serial number), IP address, Model, Firmware version, and Autorun version.
- Specify User Name / Password: Attempts to access the player to obtain further information about it. This action should be used when the player Name is listed as "Access to [player IP address] denied".
- Access Diagnostic Web Server: Opens a web browser window or tab to access the player Diagnostic Web Server.
- Access Device Web Page: Opens a web browser window or tab to access the player Device Web Page (i.e. Local Web Server).