Page Comparison

...

e. Add Player: Adds a player to the BrightSign App manually. See the Adding Players to the App section below for more details.

...

Removing a Player from the App

The BrightSign App does not automatically remove BrightSign players from the player list. If you remove a player from the local network, or if you modify the IP address of a manually added player, that player will remain in the Offline list.

To remove a player from the from the Offline list, press and hold the player icon. Then select the Delete option once it appears.

...

Note

...

Adding Players to the App

...

1. Ensure that your mobile device is connected to the same local network as your BrightSign player.

2. Open the BrightSign App.

3. Tap the button in the bottom right of the main screen. This will take you to the Search Units window.

4. Tap the IP Address field and enter the IP address of the player. If you don’t know the IP address of the player, you can find it by following these steps:

   1. Power off the player by unplugging the power supply.

   2. Remove the SD card (as well as any other storage devices).

   3. Power on the BrightSign player by reconnecting the power supply.

   4. Wait for the player to boot up: The IP address of the player, along with the serial number and firmware version, will be displayed on the screen.

5. After searching, the app will return the name and IP address of any player matching the IP address you entered.

6. Tap the player logo to add the player to the app.

...

...

Removing a Player from the App

The BrightSign App does not automatically remove BrightSign players from the player list. If you remove a player from the local network, or if you modify the IP address of a manually added player, that player will remain in the Offline list.

To remove a player from the from the Offline list, press and hold the player icon. Then select the Delete option once it appears.

Player Control Menu  

Anchor
changing_user_variables changing_user_variables

...

1. Select a player from the Active player list.

2. Tap the Edit button in the upper-right corner of the screen.

3. To add a new Action button, select the User Defined command list and tap the 

   Image RemovedImage Added

    button in the bottom-right corner of the screen. This will bring up a window that allows you to enter the Label Name and UDP Command.

   1. Label Name: The name of the button as it is displayed in the Actions section.

   2. Data: The command parameter that is sent to the player in the form of a UDP packet. For the BrightSign App to activate a BrightAuthor UDP event, this text must exactly match the text in the Specify UDP input field of the UDP Input Event in BrightAuthor.

   3. Press the Save button when you are finished configuring.

4. To edit an Action, tap and hold the Action label for a moment. You can then edit or delete the Action.

...