The XD235 LS245 and XD1035 LS445 are designed for sustained ambient temperatures between 0°C and 50°C. Non-operational (transportation or storage) temperatures can range from -20°C to 85°C. Units should be allowed time to acclimate before being powered up.
Operating the players above 50°C ambient for prolonged periods may reduce the operational life of the product and result in intermittent resetting of the device.
| Warning | ||
|---|---|---|
| ||
Exposing a cold player to warm air at high relative humidity may cause water to condense inside the player, leading to component failure. Damage due to such internal condensation is not covered by warranty. If a player is cold, allow several hours for it to acclimatize to ambient conditions before applying power. |
Power Adaptor
The XD235 LS245 and XD1035 LS445 are supplied with 12V@3A power supply.
An additional 2A of power is available for peripherals connected to the player. The user should not connect any combination of peripherals that will exceed 2A draw. If more than 2A is drawn, the external power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.
If the device is being powered by the power supply, the 2A can be shared in any way among the following connectors:
Connector
Maximum Power Usage
RJ-45
Approx. 180mA (when transferring data)
USB 2.0 (Type C)
1A
USB 2.0 (Type A)
1.5A
GPIO 3.3V
500mA
HDMI® 5V
70mA
IR blaster output
85mA
M.2 Wi-Fi Module
3V3
The combined power of these expansion ports should not exceed 3.5A
12V@1.5A power supply.