Page Comparison

Object Creation

To create a hostconfiguration object, first load the brightsign/hostconfiguration module using the require() method. Then create an instance of the hostconfiguration class.

var HostConfigurationClass = require("@brightsign/hostconfiguration");
var hc = new HostConfigurationClass();

NetworkHost

Use this interface to retrieve and modify host configuration.

getConfig()

Promise<HostConfig> getConfig() 

Returns a HostConfig interface containing current host-configuration information.

applyConfig()

Promise<void> applyConfig(HostConfigWritable config)

Applies host-configuration settings to the player. This method accepts a HostConfigWritable interface.

The config parameter should contain the complete desired configuration. Any previous configuration is overwritten. If you wish to change one item while keeping the rest of the configuration the same, then call getConfig and modify the returned object (see the example in the Examples section).

HostConfig

This interface contains host configuration parameters:

• [String] proxy:  The name or address of the proxy server used for HTTP and FTP requests. The proxy string should be formatted as "http://user:password@hostname:port". The hostname can contain up to four "*" characters; each "*" character can be used to replace one octet from the current IP address. For example, if the IP address is currently 192.168.1.2, and the proxy is set to "proxy-*-*", then the player will attempt to use a proxy named "proxy-192-168".
• [Array<String>] proxyBypassList: A list of hostnames exempted from the proxy setting. The player will attempt to reach the specified hosts directly rather than using the proxy specified in the proxy attribute. For example, the hostname "example.com" would exempt "example.com", "example.com:80", and "www.example.com" from the proxy setting.
• [Array<String>] timeServerList: An array containing zero or one time servers to be used by the player. An empty array disables automatic setting of the player's clock. A single entry indicates the time server and protocol that should be used as a URL. Supported protocols are HTTP, HTTPS and NTP. For backward-compatibility the use of just a host name is supported and indicates that NTP should be used. Note that when using HTTPS, host and peer verification are disabled since the player clock may not be correct. The following are valid time server addresses:
  • http://time.brightsignnetwork.com/
  • https://time.brightsignnetwork.com/
  • ntp://time.brightsignnetwork.com/
  • time.brightsignnetwork.com
• [String] timeServerInterval: A value specifying how often (in seconds) the player should communicate with the time server to adjust its clock. The default interval is 12 hours. The minimum interval allowed is 120 seconds.
• [String] hostName: The player host name. If no host name has been explicitly set, then a host name is automatically generated based on the device serial number. Passing an empty string to this method resets the device host name to its automatically generated value.
• [bool] loginPassword: A value of true means that the password exists, false means that there is no password.
• [bool] forwardingEnabled:  A flag that enables or disables IP forwarding. IP forwarding is disabled (false) by default.
• [bool] masqueradingEnabled:  A flag that enables or disables source address translation with IP forwarding. If forwardingEnabled is true, masqueradingEnabled must be specified as true or false:
  • If masqueradingEnabled is false, IP datagrams are forwarded between all interfaces and no address translation is done. 
  • If masqueradingEnabled is true, IP datagrams are forwarded between all interfaces, but SNAT is applied to any datagrams which are sent out of an "upstream" interface (any interface or interfaces on which a default route is set). Datagrams destined for an interface that has no default route are forwarded without NAT. 
• [Array<NatRule>] natList:  A list of DNAT rules which lets users change the destination address and port of a packet.

HostConfigWritable

This interface contains password settings for SSH. When writing settings using the applyConfig() method, some members of the HostConfig interface have special behavior.

• [String or bool] loginPassword
  • If a string is supplied, sets a plain-text login password for the SSH connection (note that SSH must also be enabled separately in the registry for this to be useful).
  • If boolean True is supplied, the existing password (if any) is left unchanged.
  • if boolean False is supplied, any existing password is removed.
• [String or bool] obfuscatedLoginPassword
  • As above, except that the password should previously have been obfuscated using a shared secret. Contact support@brightsign.biz^{Image Modified} to learn more about generating a key for obfuscation and storing it on the player.

This behavior ensures that code such as getConfig().then((c) => { applyConfig(c); }) preserves any existing password, even though the password itself is not returned by getConfig().

NatRuleMatch

The rules in this interface are compared to destinations in the TCP or UDP packets that enter the player. If the packet fields match the properties established in NatRuleMatch, the destination IP and port will be overwritten with the desired values in the NatRulesReplacement interface.

• [String] protocol: Filter for "udp" or "tcp" (the entry must be lower case).
• [optional] [String] sourceAddressRange: Filter for this range of source IP addresses (in CIDR format). Traffic from all source IP addresses will be included if this optional attribute is not specified. 
• [String] destinationAddressRange: The range of destination IP addresses (in CIDR format) to be overwritten.
• [unsigned short] destinationPort: The destination port to be overwritten.

NatRuleReplacement

The address and port properties specified in NatRuleReplacement are written to the packet to replace selected IP address and port properties. 

• [String] destinationAddress: The IP address that will replace the previous IP address in the destination.
• [unsigned short] destinationPort:  The port that will replace the previous port in the destination.

Examples

The following script uses the applyConfig() method to set the hostname, time server, and time-server refresh interval:

var HostConfigurationClass = require("@brightsign/hostconfiguration");
var hc = new HostConfigurationClass();

var configData = {};
configData.hostName = "myplayer";
configData.proxy = "";
configData.proxyBypassList = [];
configData.timeServerInterval = 1200;
configData.timeServerList = ["time.brightsignnetwork.com"];

console.log("***Configuring Host***")
hc.applyConfig(configData).then(
        function() {
            console.log("Success");
        })
    .catch(
        function(data) {
            console.log(JSON.stringify(data));
        }); 

To change one item while keeping the rest of the configuration the same, call getConfig and modify the returned object:

  var HostConfiguration = require('@brightsign/hostconfiguration');
  var hostConfiguration = new HostConfiguration;
  hostConfiguration.getConfig()
  .then(function(config) {
    config.hostName = "host-brightsign";
    hostConfiguration.applyConfig(config);
  })
  .then(function() {
    console.log("Success");
  })
  .catch(function(error) {
    console.log(`${JSON.stringify(error)}`);
  });