Page Comparison

To enable the Settings Handler from a custom Device Setup Package (not downloaded from BrightAuthor:connected):

1. Include the autorun-setup.brs code snippet in your Device Setup Package (see the Example Script section, below).
2. In BrightAuthor:connected, navigate to the player’s network (under the Network tab on the top right). In this section, the player settings are available in the Properties panel.
3. Note: The script type would be "Setup" if the “setup script” comment in autorun-setup.brs is initialized as “setup” in order to support settings being applied from BrightAuthor:connected after the setup process is completed. The setup process is completed after the success splash screen is displayed on the player’s video HDMI output.

To enable the Settings Handler from a custom presentation or custom application/plugin, include the either the autorun-custom.brs code snippet to your custom application/plugin/presentation or attach the plugin autorun-plugin-enableSettingsHandler.brs to the presentation

Once the device-side API is turned on, the player settings will be accessible in the Properties panel of BrightAuthor:connected (under the Network tab).

This API specification is used by custom setup package scripts, custom presentation, or plugins, either invoked by BrightScript or JavaScript, to enable the “Settings Panel” (settings handler).

The base URL or player’s IPv4 IP address (the default port server is hosted on 8000) is http://localhost

{
	"script": {
	“type”: “Custom” // Either “Custom” or “Setup”,
	“version”: “10.0.60” // Can be any version in a x.x.x format. Used to communicate script version to BSN.cloud,
	displayed in “Settings Panel” }
}

Partners who want to upgrade to use this feature must include the following code snippet in their BrightScript application/plugin. 

localBaseUrl = "http://localhost" 
supervisorApiV1Route = "/api/v1"

supervisorCapabilitiesUrlXfer = CreateObject("roUrlTransfer") 
supervisorCapabilitiesUrlXfer$ = localBaseUrl + supervisorApiV1Route + "/system/supervisor/capabilities"
supervisorCapabilitiesUrlXfer.SetUrl(supervisorCapabilitiesUrlXfer$) 
supervisorCapabilitiesUrlXfer.SetTimeout(15000) 
supervisorCapabilitiesUrlXfer.SetProxyBypass(["127.0.0.1", "localhost"])
supervisorCapabilitiesUrlXfer.addHeader("Content-type", "application/json")


script = CreateObject("roAssociativeArray")
  
scriptType$ = "Custom" ' script type would be "Setup" if it is setup script
version$ = "10.0.60" ' current autorun script version

script.AddReplace("type", scriptType$) 
script.AddReplace("version", version$)

body = {} 
body.AddReplace("script", script)

stringifiedJson = FormatJson(body)
rc = supervisorCapabilitiesUrlXfer.PostFromString(stringifiedJson)

if rc = 200 then
	print "===settings handler enabled"
else
	print "===failed to start settings handler, error code:";rc
end if

• The settings handler can override custom settings applied by the setup script.

• Edits to the property sheet settings in the interface will not be applied on the device side unless the code snippet in autorun-custom.brs is added to the runtime application (not the setup application) or autorun-plugin-enableSettingsHandler.brs is added as a plugin to the custom presentation (not the setup application).