...
| Tip | ||
|---|---|---|
| ||
You can edit properties of these states under File > Presentation Properties > Media List. |
First, make sure your playlist is set to Interactive. Then, drag a Media List, Video List, Image List, or Audio List icon onto the playlist area. You can then set the following parameters for your list:
...
- Image Timeout (seconds): (Media Lists, Image Lists) Specify the length of time each image remains on screen. You can also use decimal values to specify the image timeout in milliseconds (for example, 1.500 = 1500msec).
- Support 4K images (use video plane to display images): (Image Lists) Check this box to enable 4K image playback in the Image List. This will consume the 4K video decoder on the player, so you won't be able to display both a 4K video and a 4K image at the same time.
- Play from beginning on entry to state: Check this box to have the list start from the beginning each time it is transitioned to. This box is only enabled if you have checked the above Advance to next item on Media End event box (unless you are using an Enhanced Audio zone) or Advance to next item on Image Timeout box. If you leave the Play from beginning on entry to state box unchecked, subsequent transitions to the list will play the next file in the list.
- Start Index: Specify which item in the list should count as the beginning of the list. When the list plays from the beginning (see the Play from beginning on entry to state option above), it will play from the item index specified here. When non-shuffled playback reaches the end of the list, it will loop back to the top of the list (i.e. start index 10), rather than the specified Start Index.
- Shuffle playback: Check this box to randomize the order of media items in the list each time it is transitioned to.
- Event to transition to next item: Select an interactive event that allows the user to transition to the next file in the list. After selecting the event type, you must specify a trigger.
- Event to transition to previous item: Select an interactive event that allows the user to transition to the previous file in the list. After selecting the event type, you must specify a trigger.
...