...
The process of publishing BrightWall presentations differs from publishing standard presentations. See the Publishing a BrightWall Presentation page for more information.
...
BrightWall Requirements
...
- Video Files: We recommend using the .mp4 or .mov container for video files that make up a BrightWall presentation. Transport Stream (.ts) files are also supported, but they must begin with a presentation timestamp (PTS) offset of zero. Program Stream (MPEG-PS) files are not supported.
| Note | ||
|---|---|---|
| ||
It is possible to create a seamlessly looping video wall if the video files are formatted appropriately. See the Seamless Looping FAQ for more details. |
Network Requirements
...
- Networking: All players must be connected to the same network via Ethernet cable. We recommend using a dedicated switch or VLAN for BrightWall(s).
- Multicast: Multicast must be enabled on the network (BrightWall uses the PTPv2 network protocol
...
- ). BrightWall uses the following multicast address: 224.0.126.10:1539.
- Domain: When multiple BrightWalls are operating on the same network, each concurrent presentation must have a different domain number, which is set when creating the configuration file.
